Blog

Checklist for Comprehensive Post-Construction Cleaning and Scope of Services

Checklist for Comprehensive Post-Construction Cleaning and Scope of Services

Introduction

Before moving in furniture, office equipment, decor, or the instruments that may be used for the inhabited businesses or commercial setting, the entire building must be cleaned after construction is complete, regardless of the size of the structure. You don’t actually believe you would move in that way, do you​? Many people have the misconception that all that is required to clean up a construction site is a quick pass with a brush. Well they are wrong. Still, here is when you should give everything a thorough scrub if not your attention.

Scope of Work

Since there is only the building itself to clean, many people may assume that cleaning up after construction is a breeze. However, before moving in furniture and other necessary equipment, a complete cleaning of the entire building is essential. In general, you should dust everything and clean the walls, ceiling, and light fixtures. Similar considerations should be given to the baseboards, window and door casings, and other trim throughout the house. It’s also important to scrub the floors. Carpets should be vacuumed and, if necessary, professionally cleaned. It is also important to clean and shine any hard flooring. Cleaning the building’s exterior is an important step in getting it ready for the arrival of furnishings and other equipment.

Commercial Restroom cleaning procedure

There will always be a location for people to use the restroom, regardless of whether the building is intended for residential or commercial use. It is necessary to clean and polish the flooring and walls in the bathroom, as well as remove any dust and dirt that may have accumulated there. In addition to the sinks, bathtubs, and toilets, the mirror in the bathroom needs to be cleaned as well. However, it is imperative that the facilities have the basics like toilet paper and paper towels available for use by patrons. The soap dispensers ought to have a healthy supply of soap, and the rest of the supplies ought to be in good order as well.

Office Kitchen and Break-room Cleaning

In any commercial establishment that provides services to the general public, the kitchens and break rooms should be held to the same stringent standards of thorough cleanliness, attention to sanitation, and stocking. The kitchen and the dining room both share the same characteristics.

Custom Deep Cleaning Services

Depending on the sort of structure that has been recently erected, different surface materials may be used, as well as different cleaning procedures may be required. Employing the services of a specialized cleaning company, on the other hand, is the only way to ensure that the project will be finished to satisfaction. Before stocking the building with necessary equipment for the enterprise, it is absolutely necessary to give it a thorough cleaning. In addition to picking an experienced post-construction cleaning service, look for a janitorial cleaning service that can be hired on an ongoing basis, or find a company that can handle both types of cleaning. You should not worry because the unique requirements of your building and those of your company will be met by the cleaning service you hire.

Conclusion

Accountability in the form of analysis of work is achieved through the detailed coverage of services provided during the cleaning process and the decomposition of occurrences into procedures.

Why is Post-construction cleaning important?

Why is Post-construction cleaning important

Introduction

Before, during, and after construction, only professionals should clean the site. Only expert cleaning service providers can remove building waste like nails and screws, tiles and wood, cigarette butts and other garbage, dust, and dirt from every surface.

Post-construction cleaning is essential since you cannot live or operate a business in a filthy environment. Hiring construction cleaning services saves you time, effort, and energy that you could be using to unpack and arrange your possessions.

1.     Safety

Sites under construction or undergoing restoration may be hazardous. Professional cleaners are outfitted with the right boots, helmets, and other safety equipment so they can work efficiently while being safe. Avoiding slips, falls, rough edges, and sharp nails is essential. Construction site cleaning businesses with experience have the equipment, supplies, and tools required to efficiently gather trash and waste.

Newly completed projects produce a lot of dust, which, if not properly cleaned up, might lead to respiratory issues. The strong chemicals used to clean floors, carpets, tiles, and other surfaces can potentially cause health problems if the proper safety measures aren’t performed. Allow skilled and knowledgeable cleaners to handle the cleaning.

2.     Time-Saving

Whether the construction was residential, commercial, or industrial, move in as quickly as possible. Construction can disrupt your home or business, so attempt to minimize disruptions. Working with experts speeds up the cleaning process so you can resume normal activities.

During or after construction, site cleaning is a complicated task that should be done by professionals. The disposal of construction waste, from nails and screws to mounds of tiles and lumber to cigarette butts and other trash, requires the knowledge of skilled cleaners.

3.     Cost Efficient

Hiring another contractor when you have a restricted budget may seem counterproductive. Professional cleaning services cost more, but their thoroughness and efficiency are worth it. A construction site cleanup costs a portion of the total project cost. Cleaners work quickly.

A cleaning contractor’s fee depends on the job’s size, resources needed, and location or distance of construction trash hauling. You still save money on cleaning materials, gear, supplies, and equipment, as well as the difficulty of finding imaginative ways to reach every nook and cranny, the correct cleaning materials, and waste disposal places.

4.     Hidden Mess

Since you haven’t had any formal training in cleaning and lack experience clearing construction sites of clutter, you probably won’t know where to look for problems or how to clear them once you do. Clearing away dust and grime from areas where it can be easily seen is a simple task. However, if you don’t pay attention to all the obscure corners, you could miss a lot of dirt.

Expert construction site cleaners will know exactly what to use on each surface, and will have access to everything they need to get rid of any stains that may have occurred. The experts will make sure that everything is taken care of.

5.     Proper waste disposal

The varied nature of construction site trash can make it challenging to manage without training and experience. Professional cleaners, on the other hand, are well-versed in the proper disposal of all manner of trash, whether it’s destined for recycling or the landfill, and can guarantee that it will be dealt with in accordance with all applicable laws and ordinances.

Conclusion

The goal is to have the best-looking result, whether it is a new construction or a rehabilitation. Construction cleanup removes dirt, debris, and waste from the site and gives it a polished appearance. Professional construction cleaning services can help you save time, money, and energy while also increasing safety. Every construction project, whether new or restored, strives to be the best it can be. Before completing a room, dust, grime, and garbage from construction must be cleared. A skilled construction cleaning service can help you save time, money, and effort while also improving site security.

3 Phases of Post-Construction Cleaning

3 Phases of Post-Construction Cleaning

Introduction

The region becomes progressively polluted with dirt, dust, and other particles as Construction activities progresses. Because of the notorious filthiness of building sites, many homeowners prefer to temporarily relocate while their houses are being restored. Let’s be honest: they’re not pros, are they? This is logical given the nature of the firm and the constant foot traffic. If staff cleaned as they worked, the contract timeframe would be doubled. Rather, they are planning a cleaning when the project is completed. The cleansing processes and their various faces;

Phase one: Rough Cleaning

The next phase is to install the building’s plumbing and electrical systems after the building’s framework has been established. The bigger objects, such as garbage, waste, residual materials, and other things that can’t be vacuumed up, are now the first things to be eliminated. The vital component in the procedure is this step. When we are through, we will clean and vacuum the area briefly. While this process does not entail cleaning the glass or the wood, stickers on windows and doors are also removed at this time.

Construction Cleaning

Phase two: Light Cleaning

This step of the post-construction cleaning process involves the most time and effort, as well as the most cleaning supplies and equipment, in comparison to the other two phases. Particular attention is paid to the maintenance of rooms that provide obvious functions, such as kitchens and baths. Sinks, toilets, windows, and cabinets are among the installed components that receive an in-depth cleaning here. Also cleaned are the windows. Customers employ cleaners so they don’t have to perform the task themselves at this time, which is one reason why they do it.

When Clients choose Progressive Cleaning, you can feel confident that not only these areas, but also the vast majority of the interior surfaces, including the air ducts, will be given the utmost attention to detail during the cleaning process. This is something that you can be sure of when you make your selection. During this phase, we also take care of cleaning up the places where the stickers were previously placed. This involves removing any residue left behind by the stickers. These kinds of sites include, amongst other things, glass portions, windows, doors, and walls. When we’ve finished with this part of the process, we’ll be in a lot better position to start taking on customers.

Phase three: Final Cleaning

Last but not least is the process known as Final Cleaning or Touch-Up Cleaning. Since dust and filth may continue to settle for a while after the second phase, the cleaning staff schedules this to occur many days later. Cleaning up the remaining smudges, fingerprints, and other defects from the previously cleaned regions is the fastest and shortest part of the process.

When construction is finished, the cleanup process that follows can take several days’ worth of hard work to complete. For a construction company with a lot of other projects going on, this is not a simple task to supervise. Building personnel already have enough on their plates without having to worry about having to sanitize the work site once it has been completed. As a result, it is strongly suggested to use the services of knowledgeable cleaners, whether done through the construction contractor or on an independent basis.

Some clients may be tempted to forego hiring professional cleaners in favor of doing it themselves if the construction contractor does not provide additional cleaning services. If customers are in charge of cleaning instead of experts, they can forget about the building’s interior and any other secret areas that the general public has no awareness about. The potential danger to the health and safety of the building’s occupants makes this unacceptable.

Conclusion

Post-construction cleaning is time-consuming, as the three steps show. No normal construction staff could handle this. Professional cleaners are trained and equipped to execute a thorough service. On a building site, it’s best to be cautious when risk is present.

Best Vacuums for Post-Construction Cleaning

Best Vacuums for Post-Construction Cleaning

Introduction

You have undoubtedly been through enough renovations to know how nasty they can get, which is why you are probably considering purchasing a vacuum cleaner that is specifically made to deal with builder’s dust. If you haven’t already, you should really get on that.

It’s probable that your standard vacuum cleaner won’t be able to manage the fine dust that goes into every crack and crevice, as well as the larger detritus like rubble and offcuts that can be left behind when you renovate your home or have builders come in.

The most effective builders’ dust vacuums may also contain wet features, which enable you to deal with any spills or drainage difficulties that may develop during a rebuild without having to resort to a separate appliance. This saves you time and money over having to purchase a second appliance.

Post-Construction Cleaning

It is crucial to highlight that the majority of these vacuums are also well-suited to domestic life once the restoration is complete. This makes this investment helpful not only for getting through the chaos of building but also for the future.

1.      Henry HVR160 Vacuum Cleaner

Henry is a well-known brand of vacuum cleaners, and he is also more than just a style symbol; he is a reliable and straightforward appliance, perfect for a construction or remodeling site. You can easily suck up even the largest bits of garbage thanks to the powerful suction and variety of attachments.

The HVR160 is a more portable model that weighs less than the other Henry vacuums while maintaining the same suction power and 10-meter cord. The Henry HVR200-11 vacuum cleaner, for example, has a larger dust bag than this one does at 8 liters, but the capacity of this one at 6 liters is more than adequate for most homes. In case you run out, grab some extra dust bags.

2.      Karcher WD4 Wet & Dry Vacuum Cleaner

Karcher’s WD4 vacuum is made to clean up dust, heavy rubble, and spills that a regular household vacuum wouldn’t be able to pick up. It’s a great cleaner to have on hand at your construction site because of the wide range of attachments it offers and the fact that they can be conveniently kept on the vacuum itself.

The Karcher WD4 boasts a big 20-liter capacity and a clever filter system that lets you switch between wet and dry modes without having to change bags, unlike many other vacuums.

This model’s cord is shorter than average at 5 meters, and its larger size makes it more difficult to store, but it’s ideal for use in a garage or similar space.

3.      Vacmaster Wet and Dry Vacuum Cleaner 20L

This Vacmaster wet/dry vacuum is one of the best for builders’ dust. It’s a powerful and sturdy vacuum that can compete with Henry and the others on this list, plus it has some cool extra features.

The blower function can be used to blow leaves and pump up air mattresses – a pleasant feature, but not essential for your project. We think all DIY vacuums should have a power switch.

A power take off socket is where you can plug a power tool (such as a mitre saw or drill) to switch on the vacuum cleaner. Connect it to reduce dust, sawdust, and debris and avoid a costly cleanup.

Conclusion

It’s no easy effort to clean up after a major do-it-yourself project or home remodeling. It’s important to bring things back to normal as quickly as possible so you don’t have to worry about coming home to a dusty, dirty construction zone. With the help of a high-quality vacuum, you can conquer this obstacle. Purchase of either of the brands recommended will ensure your experience does not suck!

After Construction Cleaning: What Goes on After Your Construction Project

after construction cleaning

When you start cutting into drywall, ripping up floors, and pulling out old materials, then your construction project can get really dusty very quickly. It can feel like every surface in the building is covered in varying layers of dust and debris.

Once you’re done with your project, the first thing you want to do is break out the broom and dustpan to clean up some of the mess. But getting into all the nooks and crannies isn’t as easy as it seems. You may find dust lurking in corners for months after completing a construction project.

That’s why we pulled together these helpful tips for after construction cleaning to ensure a clean space after your most recent project.

Remove Construction Debris

Once a construction job is complete, you’re bound to find items littered around the worksite. You will need to pick up items like water bottles and burger wrappers as well as dispose of construction materials properly like paint and vanishes.

Wash the Walls

One of the items on your post construction cleaning checklist should be washing the walls. It’s important that you realize that even if your walls look clean, they are likely coated in a layer of dust. By washing your walls, the whole room will have a much more fresh feel.

Wipe Debris from Surfaces

If you’ve been asking yourself how long does it take for dust to settle, then you most likely need to wait a little longer before wiping the surfaces around your construction project. Generally, twenty-four hours should be long enough for even the finest particles of dust to get out of the air.

Vacuum and Clean Your Carpets and Upholstery

Hiring someone for cleaning services can ensure your carpets are as clean as possible. This is important because some people are allergic to dust and can be affected by construction debris.

Replace Air Filters

Dust not only settles on surfaces, but it also floats in the air. Make sure that you take the time to replace the air filters in your home or business after a construction project to ensure the air quality stays good.

Pressure Wash the Outdoors

Pressure washing the outdoors around your home or business after a construction project ensures that the dust and debris have truly gone away. Be thorough with your cleaning and opt for pressure washing.

Clean Door Frames, Baseboards, and Blinds

Lots of times door frames, baseboards, and blinds are overlooked when people are cleaning up after a construction project. Make sure you are thorough with your efforts and get into all of the hard to reach places.

After Construction Cleaning Help

After construction cleaning doing the steps described in this article, there are bound to be some places you miss. Only a professional can ensure you have a one hundred percent clean space.

Contact us today to schedule cleaning services for after your construction project.

The Best Way to Clean Carpets at Your Entertainment Venue

best way to clean carpets

Your big event is right around the corner. You’re ready, the event is ready, but your carpets definitely aren’t.

Your guests will be up to their knees in dirt before they’re halfway through the door!

But what is the best way to clean carpets so that your guests can practically eat their dinner off them?

Grab your tools and read on.

The Right Tools for the Job

A regular household vacuum cleaner probably isn’t going to cut it for your entertainment venue.

With all the foot traffic you’re expecting you will need to wash the carpets as well, which rules out commercial-grade vacuum cleaners.

The alternative then is buying or renting an industrial cleaner, although these can be extremely pricey.

In addition to a vacuum, you will need to wash the carpets and that requires cleaning products. These include pre-treatment, detergents and de-odorizing chemicals to ensure the long-term health of your carpets.

How Much is Too Much?

It’s easy to overestimate the materials you will need to clean a large surface area. This is never truer than when it comes time to add water.

While it might seem sensible to remove those stubborn stains with a good soaking, over-watering a carpet can cause more harm than good. This might result in discoloration, shrinkage, or worse, carpet mold.

The same is true of carpet shampoo and cleaning chemicals. Too much and you risk a build-up of soap. Not enough and those tough stains simply won’t come out.

The Best Way to Clean Carpets

Much like mowing the lawn at a big sports stadium, the right technique when cleaning your carpets makes all the difference.

Cleaning & Maintenance Management (CMM) have their own advice on the right way to vacuum. They recommend prioritizing areas that often see the most foot traffic, such as funnels, transition areas, and pathways.

They estimate that it takes 17 minutes to clean about 1,000 square feet using a conventional vacuum cleaner. This means if your facility is 10,000 square feet you’re looking at over 3 hours of vacuuming. That sucks.

Hire a Professional

Ultimately the best tip might be to save yourself some elbow grease and speak to someone who knows what they’re doing.

There are many specialists out there who make a living ensuring your carpets look as good as new.

HomeAdvisor even admits in their recent article that mistakes are practically inevitable with some do-it-yourself approaches. They state that while the do-it-yourself approach is often cheaper, it is rarely as effective as professional cleaning.

A Spotless Finish

Cleaning your carpets doesn’t have to be a thankless job. In fact, by hiring a professional it doesn’t have to be a job at all.

For entertainment venues big and small, leave it to someone who knows the best way to clean carpets.

Does your entertainment venue or workspace need a clean? Need a professional to get the job done right?

Why not check out our blog for other great articles or get in touch to find out more?

How to Clean Upholstery on Cinema Seating

How to clean upholstery

Lights, camera…spilling?

The movie theater is a magical place. However, there’s nothing magical about how dirty and sticky it can get.

And the cinema seats get the worst of it. This leaves owners wondering just how to clean upholstery.

Whether you own a theater or just have cinema seats in your home theater, keep reading to discover our awesome cleaning tips!

Suck It Up

When you have messy seats, you’re probably reaching for the soap first. Instead, you should reach for the vacuum.

A lot of the dirt, hair, and other things on your seats are just on the surface. If you immediately start washing, you might just end up pushing the dirt in or around.

Vacuuming first will help clean up anything on the surface. And for really dirty seats, you’ll notice an almost immediate improvement.

A Different Kind of Soda

For cinema seats, soda spills are one of the biggest problems. But a great solution comes from a different kind of “soda.”

It turns out bicarbonate of soda is one of the best ways to clean upholstery. Here’s how you do it.

After you first vacuum your seats, sprinkle bicarbonate of soda over all of the affected areas. You’ll need to let it sit and do its magic for about 30 minutes.

Now, you’ll need to vacuum the surface once more to clean the bicarbonate of soda. And that’s it!

Why does this method of cleaning upholstery work so well? First, it neutralizes any lingering odors in the seat. Then it effectively exfoliates the seat–great for cleaning sticky messes.

Check the Warnings

There are other cleaning methods that are simple, including trying soap and water. Before you do that, be sure to check the label of your seats.

Not all upholstery is exactly the same. Your manufacturer may have some advice on what to use (and what not to use).

It takes almost no time at all to double check the label. And this will give you peace of mind that you won’t accidentally end up ruining the seat.

Steam Cleaning

We saved our favorite solution for last. Here it is: you need to steam clean those seats!

Unless the label warning says otherwise, you start by putting hydrogen peroxide over the dirty areas. After at least ten minutes, you can bust out the steam cleaner.

Part of what makes these cleaners so good is that many of them have adjustable heads. That means you can find the kind of cloth and brush that is best for your exact fabric.

The rest is simple. Scrub all the affected areas and then simply let your chairs dry. Afterward, they’ll look, feel, and smell as good as new!

How to Clean Upholstery: The Bottom Line

Now you know more about how to clean upholstery on your own. But what if you need a little help?

At CityScape Solutions, we specialize in cleaning cinema seats and movie theaters. Whether you need help cleaning an entire cinema or just a “man cave,” you should contact us today!

What Is the Difference Between Commercial Office Cleaning and Janitorial Services?

commercial office cleaning

Did you know there are over 2 million janitors in America? That is a lot of professional cleaners, and you would definitely notice if a store or business didn’t have a janitor.

It’s important for business owners to keep a building clean, but you don’t need to do it yourself. You can hire someone to do the dirty work for you, literally.

But did you know there are actually different kinds of cleaning services? If you are trying to decide between hiring a janitor or paying for commercial office cleaning, then this guide is just what you are looking for.

Do You Need a Janitor?

First, let’s talk about janitorial services and what all the term includes. Janitors are usually hired for a regular job, or at least on a regular basis, such as weekly visits. Janitors take care of the everyday small tasks and cleaning around the office.

This includes cleaning the bathroom and scrubbing the toilets, cleaning the breakroom or lunch areas, vacuuming the floors, and taking out the trash.

None of these tasks are things that you want to go long without. Just imagine going months at a time with nobody cleaning the toilets!

If you need someone to stay at your business and constantly tend to these simple but necessary tasks, then janitorial cleaning services are what you are looking for.

Do You Need Commercial Office Cleaning?

While janitors work for you often, sometimes on an everyday basis, commercial office cleaning services are usually something that only happens when necessary, whether that is once a year or a few times.

These jobs offer deep cleaning services that janitors typically do not handle. Examples include power washing the outside of your office, cleaning the carpets, cleaning furniture, and washing windows.

How is this different from janitorial cleaning? For example, people lose 1.5 million skin cells every day, many of which get ground into your carpets. A janitor can vacuum a carpet regularly to keep it looking clean, but there will still be some dirt deep down. Commercial cleaners do the deep scrubbing to make the carpet look like new again and get rid of all the hidden germs.

Deciding Which Services You Need

If you have a business, it is important to keep it clean, especially if you have a lot of customers in your building. If you just have a small office with a few employees, then you may not need the constant cleaning that large companies require.

If you have a large store with a lot of customers, you definitely want to maintain a clean facility. Other large businesses, such as stadiums and theaters, also require a lot of cleaning. Janitorial services are very important on a daily basis.

In either situation, you may want to consider having both kinds of services. A janitor can assist with bathrooms and other daily tasks. But if you schedule appointments a couple times a year with commercial cleaners, they will make sure the business always looks its best.

Hiring Commercial Office Cleaning Services

Now that you know the difference between janitorial and commercial office cleaning, you can choose what your business needs. At CityScape Solutions, we specialize in helping companies keep their workplace looking its best.

Whether you have a small office or a giant sports arena, we can perform any cleaning services. Just use our contact page to see how we can help you.

4 Services Offered by the Best Construction Clean Up Companies

construction clean up

Ahh, cleanup. The task that everyone loves to avoid. This holds true no matter what or where the mess may be, including at a construction site.

You may not like the thought of sweeping up someone else’s mess, but the thing is that it’s a very important job and it needs to be taken seriously.

So what exactly should we be expecting from a construction clean up company? What sort of things do they do to make the cleanup look effortless?

Well, we’re glad you asked.

4 Services That Construction Clean up Companies Offer

The construction clean up crew has many different ways to clean up the mess. Keep reading to find out what kinds of cleaning tricks they have up their sleeves.

Construction Dust

With every construction project, there’s going to be a lot of dust. If left unchecked, this dust can settle into your building and be hazardous to your future health.

To keep this from happening, cleanup crews make it their priority to actually remove the dust before it settles around the building, protecting those who would use it.

Interior and Surface Washing

Construction projects tend to be very dirty projects from start to finish, and when the construction crew packs up, they still leave behind a fantastic mess.

The interior wash takes care of all of the dirt and grime on the floors and walls, and surface washing takes care of the outside services like washing down patios.

The final result is a sparkling clean finish.

Bathroom Sanitization

The bathroom is easily the dirtiest place in the house, and ironically also the one that should stay the most sanitary. Thankfully. the cleaning pros know exactly how to handle it as well.

Using an array of cleaning products, they can clean anything left behind from the toilet, sink, and shower installations, as well as the grime left around the area from construction crew traffic.

Window and Track Cleaning

If you’ve ever known the disgust of looking out of a dirty window, you know why you should have them cleaned. Post construction cleaning crews are all about window and track cleaning.

They make sure to use the right components so your window is squeaky clean and free of streaks and your tracks are free of any dirt and “corner grime” that may be hiding out.

The Cleanup Crew for Your Needs

Now that you know about a few of the services construction clean up companies have to offer, you need to know where to go in order to get the job done right the first time. Thankfully, you don’t have to look any further.

At Cityscape Solutions, we make it our top priority to give you the best cleanup services on the market for your project. We offer a host of services including construction cleaning, office space cleaning, stadium cleaning, and a lot more.

Have a question you would like to ask us? We’d love to hear it. Just reach out to us and we’ll be sure to answer any questions you may have.

5 Things Your Cinema Cleaners Should be Doing for You

In North America in 2016, there were over one billion movie tickets sold!

Those who attend movies on a regular basis are key technology consumers. They own, on average, at least four types of technology products, such as a cell phone, computer, or tablet.

Tech-savvy moviegoers leave reviews of your theatre.

Make sure your patrons have a great experience visiting your establishment. A dirty concession area means no one wants to eat the food. Filthy bathrooms and sticky chairs earn bad marks with regular movie patrons.

A great crew of cinema cleaners helps you earn great reviews from your clientele.

Read on to learn more about the 5 things your cinema cleaners should be doing for you.

1. Make a Great First Impression

The first thing your patrons see is the front entrance and box office. Most box offices feature stainless-steel countertops and large windows. The ticket windows should shine and be free of streaks.

The counters should be fingerprint-free.

2. Clean Concessions

The concession area is like any commercial food-prep area. Food handling is only one aspect of cleanliness in this area. Safety is another. A great cinema cleaner uses the right equipment to keep the area clean and germ-free.

Safety is important in the concession area. Thorough cleaning keeps the area free of bacteria and germs. The food areas need sanitizing at the end of every day.

3. Auditorium, Carpets, and Seating

Cinema patrons don’t like their feet sticking to the floor when they sit down in the auditorium. The hard surfaces under the chairs need daily cleaning. The carpets in the walkways and auditorium need daily vacuuming and sweeping.

Carpets need deep cleaning at least once a month, but sometimes more depending on the weather. Summer brings higher foot traffic necessitating more cleaning.

Armchairs and armrests show E.coli, staph, and other germs when tested. These areas need cleaning once or twice a week.

4. Restroom Area

How often are your regular employees able to stock the bathroom with paper products? How often are the bathrooms checked to make sure there are no clogs?

Clean bathrooms set your theatre apart from most other theaters. An outside cleaning service cleans the bathrooms daily. The sinks, mirrors, and faucets should shine.

The soap dispensers should be filled daily. A customer should never walk into a stall and find it’s out of toilet paper.

5. Odor

Are there lingering bad odors? Good cinema cleaners keep all areas of the theatre clean making odor a non-issue. Odor offenders usually emanate from the garbage, restrooms, or concession stand.

Keeping these areas clean means no worries about bad smells that drive patrons away. But if there is a bad smell, the cleaning crew will find and get rid of it.

Cinema Cleaners Matter

It’s impossible for theatre employees to clean everything that needs cleaning.

From the floors to the bathrooms to the concession stand, a cinema is a big cleaning job. Outsourcing to cinema cleaners is the best way to ensure your theatre stays clean, sanitary, and odor-free.

Don’t leave the job to your busy employees. If you own a theatre, it’s time to find a great cleaning crew. Don’t wait, get in contact today!